Ergebnis 1 bis 5 von 5

Thema: Die aktuellesten Firmware und Softwarestände: Phantom 2 und Zenmuse

  1. #1
    Administrator Avatar von Aeronaut
    Registriert seit
    08.01.2014
    Ort
    5xxxx
    Beiträge
    1.424
    Danke
    205
    Danke erhalten: 116

    Idee Die aktuellesten Firmware und Softwarestände: Phantom 2 und Zenmuse

    Phantom 2 Assistant Software v3.0 2014-04-07 LINK
    @Phantom 2 Main Controller Firmware* v3.00 2014-04-07
    @Phantom 2 Central Board Firmware* v1.0.1.25 2014-04-07


    Phantom 2 Assistant Software v2.00 - 2014-03-26 - LINK
    @Phantom 2 Main Controller Firmware* v2.00 - 2014-03-26 (s.o.)
    @Phantom 2 Central Board Firmware* v1.0.1.24 - 2014-03-26 (s.o.)

    DJI WIN8 Driver Installer - 2013-01-18 LINK
    DJI Driver Installer - 2013-01-07 LINK

    Phantom 2 Assistant Software v1.08 MAC - 2013-12-31 - LINK

    iOSD Assistant Software v4.0 - 2013-12-31 - LINK

    Phantom 2 Release Notes 2014-03-26 LINK

    Damit der Thread hier nicht zu unübersichtlich wird bitte Fragen zur Firmware im passenden Bereich stellen. HIER Vielen Dank!
    Geändert von Aeronaut (10.04.14 um 19:27 Uhr)
     

  2. #2
    Administrator Avatar von Aeronaut
    Registriert seit
    08.01.2014
    Ort
    5xxxx
    Beiträge
    1.424
    Danke
    205
    Danke erhalten: 116

    Es gibt wohl eine neue Firmware für das Gimbal LINK


    January 9, 2014

    DJI released new firmware for Zenmuse H3-2D!

    What’s new?

    Firmware
    •Optimized user experience when using the PHANTOM 2 remote controller for H3-2D pitch control.


    Important notes for PHANTOM 2 users:
    For users of the PHANTOM 2 with H3-2D, one must adhere to following steps to upgrade the remote controller firmware.
    •1) Use the PHANTOM RC Assistant software to upgrade the remote controller firmware to V1.0.1.11.
    •2) Calibrate the sticks and X1 channel of the remote controller using the PHANTOM RC Assistant software.
    •3) Use the PHANTOM 2 Assistant software to upgrade the Gimbal IMU firmware to V1.8 via Upgrade page.
    •4) After the upgrade is completed, calibrate the X1 channel of the main controller using the PHANTOM 2 Assistant software to ensure compatibility of PHANTOM 2 and the H3-2D.


    Damit der Thread hier nicht zu unübersichtlich wird bitte Fragen zur Firmware im passenden Bereich stellen. HIER Vielen Dank!
     

  3. #3
    Administrator Avatar von Aeronaut
    Registriert seit
    08.01.2014
    Ort
    5xxxx
    Beiträge
    1.424
    Danke
    205
    Danke erhalten: 116

    Und auch eine neue Firmware für die Funke: LINK


    January 9, 2014

    DJI released new firmware for Phantom 2 remote control!

    What’s new?

    Firmware
    •Remote Controller firmware updated to V1.0.1.11
    •Optimized output of the X1 channel on the Phantom 2 remote controller to improve user experience.



    Important notes:

    1. For the users of the PHANTOM 2 with H3-2D gimbal, one must adhere to the following steps to upgrade the remote controller firmware.
    •1) Use the PHANTOM RC Assistant software to upgrade the remote controller firmware to V1.0.1.11.
    •2) Calibrate the sticks and X1 channel of the remote controller using the PHANTOM RC Assistant software.
    •3) Use the PHANTOM 2 Assistant software to upgrade the Gimbal IMU firmware to V1.8 via upgrade page.
    •4) After the upgrade is completed, calibrate the X1 channel of the main controller using the PHANTOM 2 Assistant software to ensure compatibility of PHANTOM 2 and the H3-2D.

    2. For users of PHANTOM 2 without H3-2D, conduct all of the above steps except the third to upgrade the remote controller firmware.

    Damit der Thread hier nicht zu unübersichtlich wird bitte Fragen zur Firmware im passenden Bereich stellen. HIER Vielen Dank!
     

  4. #4
    Administrator Avatar von Aeronaut
    Registriert seit
    08.01.2014
    Ort
    5xxxx
    Beiträge
    1.424
    Danke
    205
    Danke erhalten: 116

    aktualisiert am 26.03.2014:

    What’s new?
    Main Controller Firmware

    Supported of iPad Ground Station and PC Ground Station functions. When using iPad Ground Station, the BTU firmware should be upgrade to V1.0.1.3 or above.
    Added Flight Limits functions, including Max Height and Max Radius limits.
    Added LED indicators warning, if non-DJI smart battery is detected, the LED flight indicators will be solid red.
    Optimized compass calibration algorithm to increasing its resistance to interference.
    Improved battery level detecting methods to make low battery level warning more precise.
    The maximum descending speed is limited to 3m/s.
    Fixed the bouncing problems after landing.

    Central Board Firmware

    Support of iPad Ground Station and PC Ground Station functions.
    Support of H3-3D.

    Assistant Software

    Added Flight Limits page in Phantom working mode.

    User Manual

    Added connections when using Ground Station functions.
    Added descriptions of flight limits.

    Notes

    Upgrade the main contruller and central board firmware to the latest version using PHANTOM 2 Assistant Software V2.00 otherwise there will be malfunction caused by version mismatch.

    Apology

    At DJI, we strive to provide our customers with the best products. Due to continuous R&D, we had to delay the release of the Ground Station function support for Phantom 2 until now. DJI apologizes for such a delay, as we worded hard to ensure that Ground Station was in compliance with various regulations worldwide.
     

  5. #5
    Administrator Avatar von Aeronaut
    Registriert seit
    08.01.2014
    Ort
    5xxxx
    Beiträge
    1.424
    Danke
    205
    Danke erhalten: 116

    aktualisert April 07 2014

    V3.0

    What’s new?
    Main Controller Firmware

    Special area restriction
    Compass data error notification
    H3-2D and H3-3D support


    Central Board Firmware

    Gimbal and camera identification


    Assistant

    Special area section
    H3-2D and H3-3D support


    User Manual

    New chapter about special area restriction


    Notes

    Please be aware that this firmware version limits aerial systems from flying above special areas such as airports. For more information, please visit www.dji.com. Updating your firmware signifies you fully acknowledge and accept this function. DJI accepts no liability or damage(s) or injuries incurred directly or indirectly from your refusal to update this firmware.
    Upgrade the main controller and central board firmware to the latest version using PHANTOM 2 Assistant V3.0 otherwise there will be malfunction caused by version mismatch.


    Please click HERE for more information.
     

Lesezeichen

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •